the information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. this documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. it is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. neither schneider electric industries sas nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *prices are indicative nov 3, 2015 1 product data sheet characteristics LC1D150F7 tesys d contactor - 3p(3 no) - ac-3 - <= 440 v 150 a - 110 v ac coil product availability: stock - normally stocked in distribution facility ?
2 price*: 696.00 usd main commercial status commercialised range of product tesys d product or component type contactor device short name lc1d contactor application motor control resistive load utilisation category ac-1 ac-3 poles description 3p pole contact composition 3 no [ue] rated operational voltage <= 300 v dc for power circuit <= 1000 v ac 25...400 hz for power circuit [ie] rated operational current 150 a (<= 140 f (60 c)) at <= 440 v ac ac-3 for power circuit 200 a (<= 140 f (60 c)) at <= 440 v ac ac-1 for power circuit motor power kw 75 kw at 1000 v ac 50/60 hz 100 kw at 660...690 v ac 50/60 hz 90 kw at 500 v ac 50/60 hz 80 kw at 415...440 v ac 50/60 hz 75 kw at 380...400 v ac 50/60 hz 40 kw at 220...230 v ac 50/60 hz motor power hp 125 hp at 575/600 v ac 50/60 hz for 3 phases motors 100 hp at 460/480 v ac 50/60 hz for 3 phases motors 50 hp at 230/240 v ac 50/60 hz for 3 phases motors 40 hp at 200/208 v ac 50/60 hz for 3 phases motors control circuit type ac 50/60 hz control circuit voltage 110 v ac 50/60 hz auxiliary contact composition 1 no + 1 nc [uimp] rated impulse withstand voltage 8 kv conforming to iec 60947 overvoltage category iii [ith] conventional free air thermal current 200 a at <= 140 f (60 c) for power circuit irms rated making capacity 1660 a at 440 v for power circuit conforming to iec 60947 250 a dc for signalling circuit conforming to iec 60947-5-1 140 a ac for signalling circuit conforming to iec 60947-5-1 rated breaking capacity 1400 a at 440 v for power circuit conforming to iec 60947 [icw] rated short-time withstand current 1400 a <= 104 f (40 c) 1 s power circuit 1200 a <= 104 f (40 c) 10 s power circuit 580 a <= 104 f (40 c) 1 min power circuit 140 a 100 ms signalling circuit 120 a 500 ms signalling circuit 100 a 1 s signalling circuit 250 a <= 104 f (40 c) 10 min power circuit associated fuse rating 250 a gg at <= 690 v coordination type 2 for power circuit 315 a gg at <= 690 v coordination type 1 for power circuit 10 a gg for signalling circuit conforming to iec 60947-5-1 average impedance 0.6 mohm at 50 hz - ith 200 a for power circuit
3 [ui] rated insulation voltage 1000 v for power circuit conforming to iec 60947-4-1 600 v for signalling circuit certifications ul 600 v for signalling circuit certifications csa 690 v for signalling circuit conforming to iec 60947-1 600 v for power circuit certifications ul 600 v for power circuit certifications csa electrical durability 1 mcycles 200 a ac-1 at ue <= 440 v 0.85 mcycles 150 a ac-3 at ue <= 440 v power dissipation per pole ac-3 ac-1 protective cover with mounting support plate rail standards en 60947-4-1 en 60947-5-1 iec 60947-4-1 iec 60947-5-1 ul 508 csa c22.2 no 14 product certifications bv ccc csa dnv gl gost rina ul lros connections - terminals power circuit: connector 2 cable(s) 0.02...0.08 in2 (10...50 mm2) - cable stiffness: solid - without cable end power circuit: connector 1 cable(s) 0.02...0.19 in2 (10...120 mm2) - cable stiffness: solid - without cable end power circuit: connector 2 cable(s) 0.02...0.08 in2 (10...50 mm2) - cable stiffness: flexible - with cable end power circuit: connector 1 cable(s) 0.02...0.19 in2 (10...120 mm2) - cable stiffness: flexible - with cable end power circuit: connector 2 cable(s) 0.02...0.08 in2 (10...50 mm2) - cable stiffness: flexible - without cable end power circuit: connector 1 cable(s) 0.02...0.19 in2 (10...120 mm2) - cable stiffness: flexible - without cable end control circuit: screw clamp terminals 2 cable(s) 0...0 in2 (1...2.5 mm2) - cable stiffness: solid - without cable end control circuit: screw clamp terminals 1 cable(s) 0...0 in2 (1...2.5 mm2) - cable stiffness: solid - without cable end control circuit: screw clamp terminals 2 cable(s) 0...0 in2 (1...2.5 mm2) - cable stiffness: flexible - without cable end control circuit: screw clamp terminals 1 cable(s) 0...0 in2 (1...2.5 mm2) - cable stiffness: flexible - without cable end control circuit: screw clamp terminals 1 cable(s) 0...0 in2 (1...2.5 mm2) - cable stiffness: flexible - with cable end control circuit: screw clamp terminals 2 cable(s) 0...0 in2 (1...2.5 mm2) - cable stiffness: flexible - with cable end tightening torque power circuit: 106.19 lbf.in (12 n.m) - on connector hexagonal 0.16 in (4 mm) control circuit: 10.62 lbf.in (1.2 n.m) - on screw clamp terminals - with screwdriver philips no 2 control circuit: 10.62 lbf.in (1.2 n.m) - on screw clamp terminals - with screwdriver flat ? 6 mm operating time 40...75 ms opening 20...35 ms closing safety reliability level b10d = 20000000 cycles contactor with mechanical load conforming to en/iso 13849-1 b10d = 1369863 cycles contactor with nominal load conforming to en/iso 13849-1 mechanical durability 8 mcycles operating rate 1200 cyc/h at <= 140 f (60 c)
4 complementary coil technology built-in bidirectional peak limiting diode suppressor control circuit voltage limits 0.8...1.15 uc at 131 f (55 c) operational 50/60 hz 0.3...0.5 uc at 131 f (55 c) drop-out 50/60 hz inrush power in va 280...350 va at 20 c (cos ? 0.9) 50 hz 280...350 va at 20 c (cos ? 0.9) 60 hz hold-in power consumption in va 2...18 va at 20 c (cos ? 0.9) 50 hz 2...18 va at 20 c (cos ? 0.9) 60 hz heat dissipation 3...4.5 w at 50/60 hz auxiliary contacts type type mirror contact (1 nc) conforming to iec 60947-4-1 type mechanically linked (1 no + 1 nc) conforming to iec 60947-5-1 signalling circuit frequency 25...400 hz minimum switching current 5 ma for signalling circuit minimum switching voltage 17 v for signalling circuit non-overlap time 1.5 ms on energisation (between nc and no contact) 1.5 ms on de-energisation (between nc and no contact) insulation resistance > 10 mohm for signalling circuit environment ip degree of protection ip2x front face conforming to iec 60529 protective treatment th conforming to iec 60068-2-30 pollution degree 3 ambient air temperature for operation 23...140 f (-5...60 c) ambient air temperature for storage -76...176 f (-60...80 c) permissible ambient air temperature around the device -40...158 f (-40...70 c) at uc operating altitude 9842.52 ft (3000 m) without derating in temperature fire resistance 1562 f (850 c) conforming to iec 60695-2-1 flame retardance v1 conforming to ul 94 mechanical robustness shocks contactor open 6 gn for 11 ms shocks contactor closed 15 gn for 11 ms vibrations contactor closed 4 gn, 5...300 hz vibrations contactor open 2 gn, 5...300 hz height 6.22 in (158 mm) width 4.72 in (120 mm) depth 5.35 in (136 mm) product weight 5.51 lb(us) (2.5 kg) ordering and shipping details category 22345 - ctr,d-line,open,nonrev-new discount schedule i12 gtin 00785901214489 nbr. of units in pkg. 1 package weight(lbs) 5.41 product availability stock - normally stocked in distribution facility returnability y country of origin cz
5 offer sustainability sustainable offer status green premium product rohs compliant - since 0932 - schneider electric declaration of conformity reach reference not containing svhc above the threshold product environmental profile available download product environmental product end of life instructions need no specific recycling operations contractual warranty period 18 months
|
